UNI-T UPO3000E Series - Automatic Measurement Menu

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TRIGger:WINDow:TIME 1 set the time interval of window trigger as 1s
:TRIGger:WINDow:TIME? query return1.000e000
:TRIGger:WINDow:POSition
 Command format：
:TRIGger:WINDow:POSition {ENTER|EXIT|TIME}
:TRIGger:WINDow:POSition?
 Functional description：
Set the position of window trigger.
 Return format：
Query return {ENTER|EXIT|TIME}.
 For example：
:TRIGger:WINDow:POS TIME set the position of window trigger at TIME
:TRIGger:WINDow:POS? query return TIME
Delay Trigger
:TRIGger:DELay:ARM:SOURce
 Command format：
:TRIGger:DELay:ARM:SOURce {CHANnel1 | CHANnel2| CHANnel3| CHANnel4}
:TRIGger:DELay:ARM:SOURce?
 Functional description：
Set the focus source of delay trigger.
 Return format：
Query return{CHANnel1 | CHANnel2| CHANnel3| CHANnel4}.
 For example：
:TRIGger:DELay:ARM:SOUR CHAN1 set channel 1 as the focus source
:TRIGger:DELay:ARM:SOUR? query returnCHANnel1
:TRIGger:DELay:ARM:SLOPe
 Command format：
:TRIGger:DELay:ARM:SLOPe {NEGative | POSitive}
:TRIGger:DELay:ARM:SLOPe?
 Functional description：
Set edge trigger mode, POSitive and NEGative.
 Return format：