UNI-T UPO3000E Series - Print Screen Function

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
 For example：
:TRIGger:TIMEOUT:SLOP POS set the edge trigger as POSitive
:TRIGger:TIMEOUT:SLOP? query return POSitive
Duration Trigger
:TRIGger:DURation:MODE
 Command format：
:TRIGger:DURation:MODE {
NORMAL | UPPER | LOW }
:TRIGger:DURation:MODE?
 Functional description：
Set the time mode of duration trigger.
 Return format：
Query return{
NORMAL | UPPER | LOW }.
 For example：
:TRIGger:DURation:MODE UPPER set duration trigger as UPPER mode
:TRIGger:DURation:MODE? query return UPPER
:TRIGger:DURation:PATTern
 Command format：
:TRIGger:DURation:PATTern {
HIGH | LOW | X }
:TRIGger:DURation:PATTern?
 Functional description：
Set the code pattern of duration trigger, HIGH(code pattern value as 1), LOW（code pattern
value as 0）, X (channel is invalid.)
 Return format：
Query return{
HIGH | LOW | X }.
 For example：
:TRIGger:DURation:PATTern HIGH set the code pattern of duration trigger as 1
:TRIGger:DURation:PATTern? query return HIGH
:TRIGger:DURation:QUALifier
 Command format：
:TRIGger:DURation:QUALifier {
GREaterthan | LESSthan | INRange }
:TRIGger:DURation:QUALifier?