UNI-T UPO3000E Series - Chapter 11 Storage and Load; Storing and Loading Settings; Storing and Loading Waveforms

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TRIGger:DELay:SELect
 Command format：
:TRIGger:DELay:SELect <SOURce<n>>
:TRIGger:DELay:SELect
 Functional description：
For switch selected source, SOURce<n>presents source，n take value as1, 2.
SOURce1 presents the focus source；SOURce2 presents trigger source.
 Return format：
Query return{ SOURce1 | SOURce2 }.
 For example：
:TRIGger:DELay:SELect SOURce1 select the focus source
:TRIGger:DELay:SELect? query return SOURce1
Timeout Trigger
:TRIGger:TIMEOUT:TIME
 Command format：
:TRIGger:
TIMEOUT:TIME <time>
:TRIGger:
TIMEOUT:TIME?
 Functional description：
Set the time interval of timeout trigger.
 Return format：
Query return the current time interval，unit is s.
 For example：
:TRIGger:
TIMEOUT:TIME 1 set the time interval of timeout trigger as 1s
:TRIGger:
TIMEOUT:TIME? query return 1.000e000
:TRIGger:TIMEOUT:SLOPe
 Command format：
:TRIGger:TIMEOUT:SLOPe {POSitive|NEGative|ALTernation}
:TRIGger:TIMEOUT:SLOPe?
 Functional description：
Set edge trigger mode, POSitive, NEGative and ALTernation.
 Return format：
Query return edge trigger mode {POSitive|NEGative|ALTernation}.