UNI-T UPO3000E Series - Chapter 10 Cursor Measurement; Time Measurement with Cursors; Voltage Measurement with Cursors

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TRIGger:DELay:QUALifier
 Command format：
:TRIGger:DELay:QUALifier {
GREaterthan | LESSthan | INRange | OUTRange }
:TRIGger:DELay:QUALifier?
 Functional description：
Set the time interval term of delay trigger, GREaterthan, LESSthan, INRange and OUTRange.
 Return format：
Query return{
GREaterthan | LESSthan | INRange | OUTRange }.
 For example：
:TRIGger:DELay:QUALifier GRE set the slope term as GREaterthan
:TRIGger:DELay:QUALifier? query return GREaterthan
:TRIGger:DELay:MODE
 Command format：
:TRIGger:DELay:MODE {
NORMAL | UPPER | LOW }
:TRIGger:DELay:MODE?
 Functional description：
Set the time mode of delay trigger.
 Return format：
Query return {
NORMAL | UPPER | LOW }.
 For example：
:TRIGger:DELay:MODE UPPER set the delay trigger mode as UPPER
:TRIGger:DELay:MODE? query return UPPER
:TRIGger:DELay:TIME
 Command format：
:TRIGger:
DELay:TIME <time>
:TRIGger:
DELay:TIME?
 Functional description：
Set the time interval of delay trigger.
 Return format：
Query return the current time interval，unit is s.
 For example：
:TRIGger:
DELay:TIME 1 set the time interval of delay trigger as 1s
:TRIGger:
DELay:TIME? query return1.000e000