UNI-T UPO3000E Series - Waveform Recording and Playback

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TRIGger:SHOLd:SLOPe
 Command format：
:TRIGger:SHOLd:SLOPe {POSitive|NEGative}
:TRIGger:SHOLd:SLOPe?
 Functional description：
Set edge trigger mode of setup hold, POSitive and NEGative.
 Return format：
Query return {POSitive|NEGative}.
 For example：
:TRIGger:SHOLd:SLOPe POS set setup hold trigger as POSitive
:TRIGger:SHOLd:SLOPe? query return POSitive
:TRIGger:SHOLd:PATTern
 Command format：
:TRIGger:SHOLd:PATTern {
HIGH | LOW }
:TRIGger:SHOLd:PATTern?
 Functional description：
Set the code pattern of setup hold trigger, HIGH(code pattern value as 1), LOW（code pattern
value as 0）.
 Return format：
Query return{
HIGH | LOW }.
 For example：
:TRIGger:SHOLd:PATTern HIGH set the code pattern of setup hold trigger 1
:TRIGger:SHOLd:PATTern? query return HIGH
:TRIGger:SHOLd:MODE
 Command format：
:TRIGger:SHOLd:MODE {
SETup | HOLD | SH }
:TRIGger:SHOLd:MODE?
 Functional description：
Set the time of mode of trigger, SETup, HOLD and SH.
 Return format：
Query return{
SETup | HOLD | SH }.
 For example：
:TRIGger:SHOLd:MODE HOLD set the time mode as HOLD
:TRIGger:SHOLd:MODE? query return HOLD