UNI-T UPO3000E Series - Pass;Fail Template Testing

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
:TRIGger:SHOLd:TIME:STEP
 Command format：
:TRIGger:SHOLd:TIME:STEP <step>
:TRIGger:SHOLd:TIME:STEP?
 Functional description：
Set time interval of setup hold trigger to adjust stepped value.
 Return format：
Query return the current stepped value, unit is s.
 For example：
:TRIGger:SHOLd:TIME:STEP 0.001 set time interval of setup hold trigger as 1ms
:TRIGger:SHOLd:TIME:STEP? query return 1.000e-003
:TRIGger:SHOLd:TIME
 Command format：
:TRIGger:SHOLd:TIME <time>
:TRIGger:SHOLd:TIME?
 Functional description：
Set the time interval of setup hold trigger.
 Return format：
Query return the current time interval, unit is s.
 For example：
:TRIGger:SHOLd:TIME 1 set time interval of setup hold trigger as 1ms
:TRIGger:SHOLd:TIME? query return 1.000e000
:TRIGger:SHOLd:SELect
 Command format：
:TRIGger:SHOLd:SELect <SOURce<n>>
:TRIGger:SHOLd:SELect
 Functional description：
For switch selected source, SOURce<n> presents source, n take value as1, 2.
SOURce1 presents data source；SOURce2 presents clock source.
 Return format：
Query return{ SOURce1 | SOURce2 }.
 For example：
:TRIGger:SHOLd:SELect SOURce1 set the selected focus source
:TRIGger:SHOLd:SELect? query return SOURce1