UNI-T UPO3000E Series - Rear Panel Connections; Operation Panel Controls

UNI-T
UPO 3000E&UPO2000E Series Oscilloscope Programming Manual
 Return format：
Query return setup data, return data conform to binary data IEEE 488.2 # format.
:SYSTem:LANGuage
 Command format：
:SYSTem:LANGuage {
ENGLish | SIMPlifiedchinese | TRADitionalchinese }
:SYSTem:LANGuage?
 Functional description：
Set system language.
 Return format：
Query return{ ENGLish | SIMPlifiedchinese | TRADitionalchinese }。
 For example：
:SYSTem:LANGuage ENGL set system language as English
:SYSTem:LANGuage? query return ENGLish
:SYSTem:RTC
 Command format：
:SYSTem:RTC <year>,<month>,<day>,<hour>,<minute>,<second>
:SYSTem:RTC?
 Functional description：
Set system time.
 Return format：
Query return year, month, date, hour, minute and second.
 For example：
:SYSTem:RTC 2017,7,7,20,8,8 set system time at 20:08:08 July 7,2017
:SYSTem:RTC? query return 2017,7,7,20,8,8
:SYSTem:CAL
 Command format：
:SYSTem:
CAL
 Functional description：
Set system self-calibration, the instrument can not communicate when in self-calibration.
:SYSTem:CLEAr
 Command format：
:SYSTem:
CLEAr
 Functional description：
Empty system storage waveform and setup data.