27
6. Remove the fuse by gently prying one end loose, and
then take out the fuse from its bracket.
7. Install ONLY replacement fuses with the identical type
and specification as follows and make sure the fuse
is fixed firmly in the bracket.
0.315A. 250V fast type fuse, φ 5 x 20mm.
8. Rejoin the case bottom and the case top, and install
the screw.
9. Rejoin the battery door from the battery compartment,
and install the screw
10. Rejoin the holster and the Meter.
Replacement of fuses is seldom required. Burning of a
fuse always results from the improper operation.
** END **
This operating manual is subject to change without notice.
Model UT39A/B/C: OPERATING MANUAL
To Next Page
Loading...
Need help?
General
