Need help?Do you have a question about the UNI-T UT203 and is the answer not in the manual?
General| Frequency range | 0.01 - 1000 kHz |
|---|---|
| AC current range | 40 - 400 A |
| AC voltage range | 4 - 600 V |
| Continuity check | Yes |
| DC voltage range | 0.4 - 600 V |
| Basic accuracy (frequency) | ±(0.1%+3) |
| Basic accuracy (DC current) | ±(2%+3) |
| Basic accuracy (DC voltage) | ±(0.8%+1) |
| Basic accuracy (resistance) | ±(1%+2) |
| Dimensions (WxDxH) | 76 x 30 x 210 mm |
| Battery voltage | 9 V |
Weight and Dimensions| Weight | 200 g |
|---|
Procedure for measuring DC and AC voltage using the meter.
Instructions for measuring electrical resistance with the meter.
Steps to measure both DC and AC current using the clamp meter.
Detailed accuracy specifications for DC voltage measurements.
Detailed accuracy specifications for DC current measurements.
Detailed accuracy specifications for AC current measurements.
To Next Page
