Need help?Do you have a question about the UNI-T UT231 and is the answer not in the manual?
General| Backlight | Yes |
|---|---|
| Product type | Digital multimeter |
| Frequency range | 0.02 - 0.5 kHz |
| AC current range | 40 - 1000 A |
| AC voltage range | 15 - 600 V |
| Temperature measurement range | -50 - 1000 °C |
| Dimensions (WxDxH) | 112 x 39 x 303 mm |
| Battery voltage | 1.5 V |
Weight and Dimensions| Weight | 601 g |
|---|
General manual information, unpacking procedure, and electrical symbols reference.
Crucial guidelines for safe usage, warnings, and operational rules to prevent hazards.
Details the meter's physical structure, buttons, and display symbols.
Lists various electrical and temperature parameters the meter can measure.
Methods for measuring three-phase power systems.
Covers general, environmental, and accuracy specifications for the meter.
Covers routine cleaning, care, and battery replacement procedures.
Describes the UT231 as a handheld intelligent power clamp meter.
Lists items to check for completeness and damage upon receiving the meter.
Detailed safety information, including CAT ratings and rules for safe operation.
Introduces the explanation of electrical symbols used on the meter.
Identifies and illustrates components on the meter's front face.
Detailed illustration and identification of components on the meter's front face.
Illustrates the back and bottom structure of the meter.
Explains the operation of POWER, HOLD, LIGHT, and MENU buttons.
Explains USB, LOAD, CAL, SAVE, Delta, and MAX/MIN button functions.
Explains further functions of SAVE, CLEAR, and MAX/MIN buttons.
Explains the meaning of various symbols shown on the meter's LCD display.
Steps required before performing measurements, including power-on and battery check.
Procedure for measuring AC voltage and frequency.
Procedure for measuring AC current and AC voltage.
Procedure for measuring active power and phase angle.
Procedure for measuring apparent power and reactive power.
Procedure for measuring power factor and phase angle.
Procedure for measuring active energy and time.
Procedure for measuring temperature in Celsius and Fahrenheit.
General technical details of the meter.
Operating and storage conditions for the meter.
Accuracy specifications for AC voltage measurements.
Accuracy specifications for frequency measurements.
Routine cleaning and care of the meter.
Step-by-step guide for battery replacement.
To Next Page
