Need help?Do you have a question about the UNI-T UT207 and is the answer not in the manual?
General| Backlight | Yes |
|---|---|
| AC current range | 66 - 1000 A |
| DC voltage range | 6.6 - 600 V |
| Resistance range | 20 - 20000 Ω |
| Basic accuracy (frequency) | ±(0.1%+3) |
| Basic accuracy (DC current) | ±(1.5%+8) |
| Basic accuracy (DC voltage) | ±(0.8%+1) |
| Basic accuracy (resistance) | ±(1%+2) |
| Temperature measurement range | -40 - 1000 °C |
| Dimensions (WxDxH) | 105 x 45 x 286 mm |
| Battery voltage | 9 V |
Weight and Dimensions| Weight | 533 g |
|---|
Follow rules to prevent electric shock, injury, or equipment damage during use.
Do not attempt to measure voltages higher than 600V AC/DC to avoid shock or damage.
Disconnect power and discharge capacitors before measuring resistance.
Disconnect power and discharge capacitors before testing diodes.
Disconnect power and discharge capacitors before measuring continuity.
Do not attempt to measure voltages higher than 600V AC/DC during frequency measurement.
Do not attempt to measure voltages higher than 600V AC/DC during duty cycle measurement.
The operating temperature must be 0°C ~ 40°C when measuring current.
Operating temperature limit for current measurement.
To Next Page
