UNI-T UT203

Specifications
A. General Specifications:
Maximum Voltage between any Terminals and grounding: Refer to different range
input protection voltage.
Display: 3 3/4 digits LCD display, Maximum display 3999
Polarity: Automatically display.
Overloading: Display OL or –OL
Battery Deficiency: Display
Measurement Speed: Updates 3 times/second.
Measuremnet Deviation: The conductor being meaured is not placed in the center
of the jawt during AC/DC current measurement, it will cause extra 1% deviation
based on the stated accuracy.
Drop Test: 1 meter drop test passed.
Max. Jaw Size: 28mm diameter.
Projected Max. Current conductor size: 26mm diameter.
Electro-Magnetic: When carrying out measurement near the electro-magnetic, it
may cause unstable or wrong reading.
Power: 1 x 9V battery (NEDA1604 or 6F22 or 006P)
l
l
l
l
l
l
l
l
l
l
l
l
Model UT203/204: OPERATING MANUAL
33