UNI-T UT58A User Manual

Safety Information
This Meter complies with the standards IEC61010: in
pollution degree 2, overvoltage category (CAT. II 1000V,
CAT. III 600V) and double insulation.
CAT. II: Local level, appliance, PORTABLE EQUIPMENT
etc., with smaller transient voltage overvoltages than
CAT. III
CAT. III: Distribution level, fixed installation, with smaller
transient overvoltages than CAT. IV
Use the Meter only as specified in this operating manual,
otherwise the protection provided by the Meter may be
impaired.
In this manual, a Warning identifies conditions and
actions that pose hazards to the user, or may damage
the Meter or the equipment under test.
A Note identifies the information that user should pay
attention to.
International electrical symbols used on the Meter and
in this Operating Manual are explained on page 8.
5
Model UT58A/B/C: OPERATING MANUAL

UNI-T UT58A Specifications

General

Data hold	Yes
Product type	Digital multimeter
AC current range	0.02 - 20 A
AC voltage range	2 - 750 V
DC current range	0.002 - 20 A
DC voltage range	0.2 - 1000 V
Capacitance range	2 - 100000 nF
Basic accuracy (DC current)	±(0.8%+1)
Basic accuracy (DC voltage)	±(0.5%+1)
Basic accuracy (capacitance)	±(4%+3)
Battery voltage	9 V
Dimensions (WxDxH)	88 x 39 x 179 mm

Weight and Dimensions

Weight	350 g