UNI-T UT603

Power
Hold
(UT602
only)
L-C
(UT603
only)
9
Model UT602/603: OPERATING MANUAL
Functional Buttons
Below table indicated for information about the functional
button operations.
Button Description
Press the Power down to turn the Meter on.
Press the Power again to turn the Meter power off.
Press HOLD once to enter the hold feature, the LCD
display .
Press HOLD again to exit hold feature, the
disappear.
Press L-C down to enter the Capacitance
measurement mode.
Press L-C up to enter the Inductance measurement
mode.