To Next PageTo Next Page
Need help?Do you have a question about the UNI-T UT61D and is the answer not in the manual?
General| Backlight | Yes |
|---|---|
| Product type | Digital multimeter |
| Frequency range | 0.01 - 10000 kHz |
| AC current range | 0.6 - 10 A |
| AC voltage range | 0.06 - 750 V |
| DC voltage range | 0.06 - 1000 V |
| Dimensions (WxDxH) | 87 x 180 x 47 mm |
| Battery voltage | 9 V |
Weight and Dimensions| Weight | 370 g |
|---|
Introduction to the operating manual, safety precautions, and meter capabilities.
Details safety compliance, overvoltage categories, and important warnings for safe operation.
Provides essential rules to avoid electric shock, personal injury, and damage to the meter.
Explains the meaning of international electrical symbols used in the manual.
Illustrates and labels the physical components of the digital multimeter.
Explains the functions and positions of the rotary switch for various measurements.
Describes the operations of the various functional buttons on the multimeter.
Lists and explains the meaning of various symbols displayed on the meter's LCD screen.
Step-by-step guide for measuring DC and AC voltage with the multimeter.
Instructions for safely measuring DC and AC current using the multimeter.
Explains how to connect and measure resistance accurately with the multimeter.
Procedure for performing continuity tests, including buzzer indication.
Guide on how to test diodes, including forward voltage drop readings.
Steps for measuring capacitance, including notes on residual capacitance.
Instructions for measuring frequency and duty cycle with the multimeter.
How to measure temperature using the K type thermocouple (UT61B/C only).
Procedure for measuring the hFE parameter of transistors (UT61A only).
How to use the EF (Electric Field) function for detecting voltage.
Explains how to use the data hold function to freeze readings.
Details on using the RANGE button for manual and auto-ranging.
How to record and display maximum and minimum measured values.
Usage of the PEAK function for capturing transient voltage/current peaks.
Information on data output via RS232C or USB.
How to use the REL mode to subtract a stored value from the current measurement.
Function of the BLUE button for selecting measurement modes.
Instructions for activating and using the display backlight.
How the meter enters sleep mode to save battery and how to disable it.
Lists general specifications including voltage, display, measurement speed, and overload protection.
Details on accuracy, operating temperature, and humidity requirements.
Accuracy, resolution, and input impedance for DC voltage measurements.
Accuracy, resolution, and input impedance for AC voltage measurements.
Specifications for DC current measurement, including range, accuracy, and overload protection.
Specifications for AC current measurement, including range, accuracy, and overload protection.
Accuracy and remarks for resistance measurements across different ranges.
Accuracy and remarks for capacitance measurements across different ranges.
Specifications for frequency measurement, including accuracy and input amplitude.
Remarks and overload protection for diode testing.
Remarks and overload protection for continuity testing.
Accuracy and remarks for temperature measurements.
Basic cleaning and care instructions for the multimeter.
Step-by-step guide for replacing the multimeter's battery.
Instructions for testing and replacing internal fuses.
Information regarding the optional USB serial port for data communication.
