To Next PageTo Next Page
Need help?Do you have a question about the UNI-T UT61E and is the answer not in the manual?
General| True RMS | Yes |
|---|---|
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| hFE | Yes |
| Analog Bar Graph | Yes |
| MAX/MIN Mode | Yes |
| Relative Mode | Yes |
| USB Interface | Yes |
| Input Protection | Yes |
| Power | 9V Battery (6F22) |
| Display | LCD |
| Temperature | No |
| Auto Power Off | Yes |
| Weight | 370g |
| DC Voltage | 1000V |
| AC Voltage | 750V |
| DC Current | 10A |
| AC Current | 10A |
| Resistance | 60MΩ |
| Frequency | 10MHz |
| Display Count | 22000 |
| Duty Cycle | 0.1% - 99.9% |
Guides on how to perform DC/AC voltage measurements using the multimeter.
Instructions for measuring DC and AC current with the multimeter.
Steps for measuring resistance using the multimeter.
Procedure for testing continuity with the multimeter.
Instructions on how to test diodes with the multimeter.
Steps for measuring capacitance using the multimeter.
Procedure for measuring frequency with the multimeter.
Instructions for temperature measurement using specific models.
Steps for measuring transistor hFE on UT61A model.
Guide for using the EF Function on UT61A model.
Presents DC voltage measurement ranges, resolutions, accuracy, and input impedance.
Details AC voltage measurement specifications for different models.
Lists DC current measurement ranges, accuracy, and overload protection.
Provides AC current measurement ranges, accuracy, and overload protection.
Details resistance measurement ranges, accuracy, overload protection, and remarks.
Lists capacitance measurement ranges, accuracy, overload protection, and remarks.
Presents frequency measurement ranges, accuracy, overload protection, and input amplitude requirements.
Provides basic maintenance tips like cleaning and power off procedures.
Step-by-step guide for replacing the battery in the multimeter.
Instructions for replacing the fuses in the multimeter.
