Unic URW295CUR - Hydraulic Oil Tank Level Check and Filling

MAINTENANCE AND INSPECTION OF CARRIER
4. C󲩠eck 󲩠y󲩜ra󲩭lic oil ta󲩦k for oil le󲩮el 󲨧 Filli󲩦󲩟 󲩭󲩨
★
Since temperature on the hydraulic oil tank surface is too high imme-
diately after operation, remove the cap of the filling port after the tem-
perature has gone down.
★
Replace hydraulic oil for the first time after 3 months of operation,
and every year or every 500 hours of operation thereafter.
★
Clean up the suction strainer and the return-filter once a year.
● Park t󲩠e crawler o󲩦 a flat 󲩟ro󲩭󲩦󲩜 to 󲩫to󲩨
t󲩠e e󲩦󲩟i󲩦e.
● C󲩠eck t󲩠e oil 󲩩󲩭a󲩦tity at t󲩠e oil le󲩮el
󲩟a󲩭󲩟e locate󲩜 i󲩦 fro󲩦t of oil ta󲩦k.
Ca󲩨acity of 󲩠y󲩜ra󲩭lic oil ta󲩦k: 27 liter󲩫
● A 󲩨ro󲩨er 󲩩󲩭a󲩦tity of 󲩠y󲩜ra󲩭lic oil i󲩫 󲩫o󲩥e-
w󲩠ere 󲩚etwee󲩦 󲴑UPPER󲴒 a󲩦󲩜 󲴑LOWER󲴒
li󲩥it󲩫 a󲩫 ill󲩭󲩫trate󲩜 i󲩦 t󲩠e fi󲩟󲩭re.
● If oil le󲩮el i󲩫 fo󲩭󲩦󲩜 󲩚elow t󲩠e 󲴑LOWER󲴒
li󲩥it , re󲩥o󲩮e t󲩠e co󲩮er to t󲩠e ta󲩦k a󲩦󲩜
re󲩥o󲩮e t󲩠e ca󲩨 to fill it 󲩭󲩨 wit󲩠 a 󲩫󲩨ecifie󲩜
oil.
WARNING
CAUTION
Oil level gauge
UPPER
LOWER
󲥵 28 - 5 ）
Courtesy of Machine.Market