Need help?Do you have a question about the Unical MULTI KMX2 18HE and is the answer not in the manual?
General| Brand | Unical |
|---|---|
| Model | MULTI KMX2 18HE |
| Category | Air Conditioner |
| Language | English |
Lists standard parts included with the air conditioning system for installation.
Details optional items like remote controls and magnetic rings for enhanced functionality.
Critical warnings and cautions regarding installation to prevent injury, damage, fire, or equipment failure.
Safety measures for flammable refrigerants (R32/R290) and room size requirements for installation.
Explains the meaning of safety symbols, particularly those related to flammable refrigerants and warnings.
Outlines the sequential steps for installing the air conditioning system with page references.
Illustrates recommended installation layout, including minimum clearances and mounting details.
Provides crucial safety notes, such as using a stud finder and minimum pipe run requirements.
Details technical specifications for unit operation, including voltage and compressor frequency.
Specifies maximum allowable refrigerant pipe lengths and height differences between units.
Criteria for selecting the best location for the outdoor unit, considering wind, sunlight, and noise.
Instructions for physically mounting the outdoor unit and routing pipes, including dimensional specifications.
Guidance on drilling wall holes for connections and installing the drain joint correctly.
Essential safety precautions for working with refrigerant piping to prevent leaks and hazards.
Step-by-step instructions for properly cutting refrigerant pipes and removing any burrs.
Detailed guide on flaring pipe ends and connecting them, including torque values and oil application.
Critical safety guidelines for performing electrical wiring to prevent shock, fire, and unit damage.
Specifies cable types, sizes, and wiring standards for different regions and absorbed current.
Detailed diagrams illustrating electrical connections for various indoor/outdoor unit configurations.
Safety precautions and a step-by-step guide for vacuuming the refrigeration system using a manifold gauge.
Provides formulas and tables for calculating additional refrigerant needed based on pipe length.
Procedures for checking insulated resistance, grounding, and electrical leakage after installation.
Explains how to detect refrigerant leaks using soap water solution or a dedicated leak detector.
A checklist of essential items to verify before conducting the system's test run.
Instructions for testing the functionality of both indoor and outdoor units after installation.
Details on the automatic wiring and piping error correction feature and how to activate it.
Information on the proper disposal of waste electrical and electronic equipment per EU directives.
Safety measures and checks required before performing any maintenance or servicing on the unit.
Guidelines for repairing electrical components, sealed parts, and intrinsically safe components.
Procedures for handling refrigerants during service, including recovery, evacuation, and charging.
Comprehensive technical data for outdoor and indoor units, including piping and electrical connections.
To Next Page
