Unico SQ Series - Page 4

6.16 “Energy low” warning after blanking………………………………
68
6.17 “Energy too low” warning……………………………………………
69
6.18 No DC +12V on PCB SST8.412.113………………………………
70
7. Maintenance……………………………………………………
71
7.1 Working Environment…………………………………………………
71
7.2 Replace Tungsten Lamp………………………………………………
71
7.3 Replace Deuterium Lamp……………………………………………
75
7.4 Replace Memory Battery……………………………………………
77
7.5 Upgrade Firmware……………………………………………………
78
7.6 Check Performance……………………………………………………
81
7.6.1 Prepare……………………………………………………………………………
81
7.6.2 Check Wavelength Accuracy…………………………………………………
81
7.6.3 Check Stray Light………………………………………………………………
82
7.6.4 Check Absorbance Accuracy…………………………………………………
82
7.6.5 Check Dark Current……………………………………………………………
82
7.6.6 Check Energy Profile……………………………………………………………
83
Appendix……………………………………………………………
84
Order NO. List of UV-2800…………………………………………………
84
Order NO. List of UV-2802, UV-2802PC…………………………………
85
Order NO. List of UV-2802S, UV-2802PCS………………………………
86
Order NO. List of UV-3802…………………………………………………
87
Order NO. List of UV-4802…………………………………………………
88