Unicorn Dartboard Cabinet

Need help?

Do you have a question about the Unicorn Dartboard Cabinet and is the answer not in the manual?

Summary

Dartboard Cabinet Mounting and Wall Installation

Wall Mounting Hardware and Procedure

Guidance on selecting correct wall hardware and following steps for cabinet installation.

Parts Identification

Visual identification of all parts included in the kit for assembly and mounting.

ASSEMBLY MANUAL

Step 1: Mounting Plate to Cabinet

Instructions for attaching the mounting plate inside the cabinet using hardware #1, #2, #3, #4.

Step 2: Dartboard Hanging Hardware

Steps for attaching hanging screws (#5) and bumpers (#6) to the dartboard back.

Step 3: Cabinet to Wall Installation

Instructions for installing the dartboard into the cabinet and attaching the cabinet to the wall.

LIMITED WARRANTY

Warranty Coverage and Exclusions

Details what is covered and not covered under the 90-day limited warranty for defects.

Obtaining Warranty Service

Procedures for obtaining warranty service, including required documentation and contact information.

This document provides instructions for mounting a Unicorn dartboard into a cabinet and then mounting the cabinet onto a wall. It also includes a parts identifier, assembly manual, and a limited warranty.

Function Description

This manual guides users through the process of securely installing a dartboard within its cabinet and subsequently attaching the entire assembly to a wall. It emphasizes the importance of using appropriate hardware for the specific wall type to ensure safety and prevent damage. The dartboard itself is designed for recreational or competitive dart play. The cabinet provides a housing for the dartboard, likely offering protection and a more finished aesthetic.

Important Technical Specifications

Mounting Hardware (Wall): Not provided with the product. Users must purchase hardware capable of holding up to 50 pounds, suitable for their specific wall type (e.g., drywall, wood paneled).
Cabinet Hanging Holes: Four holes are provided in the back of the cabinet, spaced 16 inches apart, which is typically the distance between wall studs.
Bull's Eye Height: The correct hanging measurement for the bull's eye is 5 feet 8 inches from the floor.
Dartboard Mounting Plate Screw (#5): Locations for installation are specifically marked on the backside of the dartboard.
Bumpers (#6): Locations for installation are specifically marked on the backside of the dartboard.
Nail (#7): 5/8" in length, used to secure the bumper.
Dart Safety Warning: Darts are not toys and should be kept out of reach of children. They should not be used when anyone is in the vicinity of the dart's flight path or target area.
Warranty Period: 90 days from the date of original purchase in the United States and Canada.
Customer Service Hours: Monday - Friday, 9:00 am to 5:00 pm EST.
Customer Service Phone: 1-866-556-2754.
Website for Parts/Support: www.escaladesports.com.
Manufacturer Address: 817 Maxwell Ave. Evansville, IN 47711.
CPSIA#: CPSIA#2- (partial number provided).

Usage Features

Wall Mounting: The manual instructs users to follow the manufacturer's hardware instructions for installing the cabinet onto the wall. It advises using a "Stud Finder" to locate wall studs for secure mounting. A contractor can also assist with safe installation.
Dartboard Installation: The dartboard is installed into the cabinet after the cabinet is mounted to the wall. The manual provides clear steps for attaching the mounting plate to the inside of the cabinet, and then attaching the hanging screw and bumpers to the back of the dartboard.
Bumper Installation: A small hammer is used to lightly tap the 5/8" nail (#7) into place, and a small flat punch is used to finish driving it into the bottom of the bumper (#6).
Dartboard Removal: The dartboard should be removed from the cabinet when mounting the cabinet to the wall to prevent damage or facilitate installation.
Parts Identification: A "PARTS IDENTIFIER" section lists and illustrates all included hardware components, specifying quantities and dimensions (e.g., 10 mm Screw, 3 mm Lock Nut, 4 mm Washer, 1" Screw, Bumper, 5/8" Nail).
Online Resources: Users can order replacement parts and find technical support on the manufacturer's website.

Maintenance Features

Warranty Coverage: The limited warranty covers defects in materials and workmanship under normal use for 90 days. It explicitly states what is covered (defects in materials/workmanship) and what is not (improper usage, negligence, misuse, abuse, transportation damage, acts of nature, accident, commercial applications, unauthorized modifications/repairs, expendable items, normal wear, delivery/installation/assembly/transport costs).
Obtaining Warranty Service: To enforce warranty rights, users must have completed and mailed the Product Registration Card within 10 days of purchase, include the original sales receipt, call the Consumer Service Department, and if instructed to return the product, ship it at their own expense in protective packaging. They must also include their name, address, phone number, product model number, and a description of the problem.
Warranty Remedies: If a defect is found during the warranty period, the company will, at its option, repair, replace with a new or equivalent product, or refund the original purchase price. The company's liability is limited to the original purchase price.
Limitations: The warranty is available only to the original purchaser in the US and Canada. The company's liability is limited to repair or replacement and does not include indirect, incidental, or consequential damages. The warranty is expressly made in lieu of all other warranties. Some states may not allow limitations on implied warranties or exclusion of damages, so these limitations may not apply to all users.