Unicorn Dartboard Cabinet - ASSEMBLY MANUAL; Step 1: Mounting Plate to Cabinet; Step 2: Dartboard Hanging Hardware; Step 3: Cabinet to Wall Installation

Important Note : The locations for installing the #5 Mounting Plate Screw and #6 Bumpers
are Specifically marked on the backside of the Dart Board.
#5
ASSEMBLY MANUAL
Step.1
Attaching #1 Mounting Plate to Inside of Cabinet.
Step.2
Attaching #5 Hanging Screw and # 6 Bumpers to Back of Dartboard.
Step.3
Installing Dartboard into Cabinet.
#3
#4
#3
#4
#2
#2
#1
#7
#6
Use a small hammer to lightly tap
the #7 nail into place and a small flat punch
to finish driving it into bottom of the #6 bumper
1/8"
Step.2
Use compatible hardware to attach Cabinet onto wall.
Attach using this 4 holes.
Note: wall mounting hardware not included.
Step.1