How to Mount Dartboard into Cabinet and Cabinet onto Wall
It is very important to use correct hardware for your particular wall to avoid injury or damage.
Therefore,hardware for mounting the cabinet to your wall is NOT provided. Purchase necessary
hardware from your local hardware store. Explain to your hardware dealer the TYPE OF WALL
you are mounting your cabinet onto : i e. drywall board, wood paneled, etc. Make sure you are
provided hardware to hold up to 50 pounds.
1. Follow manufacturer's hardware instructions to install the cabinet onto your wall. Four holes
are provided in the back of the cabinet in each corner for this purpose. These cabinet hanging
holes are 16" apart (typically the distance between wall studs).
Helpful Hints: A. A “Stud Finder” can be purchased
2. Remove dartboard from cabinet when mounting cabinet to wall.
at your local hardware store to aid in
locating the studs inside your wall.
B. A contractor can also offer assistance in the Safe and Correct hanging of
your Dart Cabinet.
Important Note : The correct hanging measurements are 5 feet 8 inches from the bull's eye to
the floor.
WARNING: Darts are not a toy for use by children. They may
cause serious or fatal injury. Keep out of reach of children.
Do not use when any person or animal is in the vicinity of the
intended flight path of the dart or target area.
Please contact us before returning the product to the store !
CONTACT INFORMATION:
Hours: Mon.- Fri., 9:00 am to 5:00 pm EST
Replacement Parts: order online at: www.escaladesports.com
Technical Support: customerservice@escaladesports.com
Phone: 1-866-556-2754
PARTS IDENTIFIER
#5 (to scale) #6 #7 (to scale)
#1 #2 (to scale) #3 (to scale) #4 (to scale)
Mounting Plate
1 pc
10 mm Screw
2 pcs
3 mm Lock Nut
2 pcs
4 mm Washer
2 pcs
1" Screw
1 pc
Bumper
3 pcs
5/8" Nail
3 pcs
To Next Page
Loading...
Need help?
General
