To Next PageTo Next PageWhy can’t I program channel with alpha character on my Uniden BC9000XLT Two-Way Radio?
Alpha character programming is available on channels 1 - 250. If you can’t program a channel with an alpha character on your Uniden Two-Way Radio, make sure the channel is within that range.
How to fix Uniden BC9000XLT scanner that won’t work?
If your Uniden Two-Way Radio scanner won’t work, first check the connections at both ends of the AC adapter and ensure that the wall switch for the outlet is turned on, as it could be controlled by the switch. Try moving the AC adapter to a different wall outlet. Also, verify that the power switch on the scanner is turned on.
What to do if Uniden BC9000XLT scan won’t start?
If your Uniden Two-Way Radio scan won’t start, press the bank key again. Ensure that there are programmed channels and adjust the squelch control.
What to do if Uniden BC9000XLT Two-Way Radio scan won’t stop?
If your Uniden Two-Way Radio scan won’t stop, adjust the Squelch Control. Also, check the antenna connection and try the band search.
Why does my Uniden BC9000XLT Two-Way Radio have poor reception?
If you are experiencing poor reception on your Uniden Two-Way Radio, check the antenna and its connection. The issue might be that you are in a fringe area. You may need an optional multi-band antenna.
What to do if Uniden Two-Way Radio search won’t start?
If your Uniden Two-Way Radio search won’t start, adjust the Squelch Control.
What to do if my Uniden Two-Way Radio scanner won’t allow any program inputs?
If your Uniden Two-Way Radio scanner won’t allow any program inputs, check the Enter Lock feature.
General| Modulation Types | AM, FM, WFM |
|---|---|
| Channel Capacity | 1000 Channels |
| Display | LCD |
| Bands | VHF, UHF, 800 MHz |
| Channels | 1000 |
| Scan Rate | 100 channels per second |
| Memory | 1000 memories |
| Mode | Scan, Search |
| Step Size | 5, 12.5, 25 kHz |
Lists the types of communication the scanner can monitor, covering public services and bands.
Guides users on finding additional resources and information about the scanner and hobby.
High-speed scanning and searching technology for quick signal detection.
Feature allowing easy and precise selection of frequencies or channels.
Scanner can store up to 500 distinct frequencies for monitoring.
Temporarily excludes channels or frequencies from the scanning cycle.
Reduces scanner sensitivity to prevent overload from strong signals.
Automatically bypasses unmodulated or data signals during scanning.
Allows adjustment of frequency increments for searching or manual tuning.
Step-by-step guide for setting up the scanner as a base unit.
Explains the basic principle of how the scanner searches for active frequencies.
Details the process of searching for active frequencies within a range.
Procedure to adjust squelch control for optimal signal reception and noise reduction.
Automatically sorts frequencies by number for faster scanning cycles.
Outlines the various ways to input frequencies into the scanner's memory.
Instructions for entering frequencies manually using the keypad.
Steps for programming channels using the rotary tuner.
Using the search function to find and store active frequencies.
Procedure to automatically store active frequencies into selected banks.
Procedure to remove a frequency from a channel.
Allows moving or replacing frequencies between channels.
Assigns text labels (up to 16 characters) to channels for easy identification.
Procedure to remove or edit alpha character labels from programmed channels.
Initiates scanning across all programmed channels and active banks.
Customizing which banks are included during the scanning process.
Temporarily excludes specific channels from the scanning cycle.
Restores previously locked-out channels for scanning.
Removes lockout status from all programmed channels simultaneously.
Allows continuous monitoring of designated priority channels.
Procedure to change the priority channel within a bank.
Guides users on initiating a search for active frequencies within a specified range.
Temporarily suspends search to manually move up/down through frequencies.
Increases search speed for faster frequency detection.
Scanner waits two seconds after a transmission before resuming search.
Excludes specific frequencies from being stopped on during a search.
Restores previously locked-out frequencies for search.
Identifies internal frequencies that can cause the scanner to stop during search.
Instructions for programming NOAA weather frequencies into the scanner.
How to bypass unmodulated or data signals during scanning.
Adjusting the minimum space between frequencies in search or manual mode.
Selecting the appropriate signal reception mode for a frequency.
Reducing sensitivity to prevent overload from very strong signals.
Utilizing the lock feature to prevent unintentional programming entries.
Counts how many times the scanner stops on an active channel.
Shows the programming status of channels within a bank.
Automatically records broadcasts when scanning stops on a channel.
Quickly reviewing settings for various scanner features.
Setting the display brightness to BRIGHT, DIM, or OFF.
Turning the Hi-Cut filter ON or OFF for audio clarity.
Instructions for installing an optional CTCSS Tone Board into the scanner.
Allows squelch to break only when a specific CTCSS Tone is received.
Procedure to modify the CTCSS tone frequency for a programmed channel.
Basic tips for operating and maintaining the scanner for optimal performance.
Guidance on choosing an optimal placement for the scanner to ensure good reception.
Procedures for safely cleaning the scanner's exterior and display.
Information on when and how to seek professional repair services for the scanner.
Critical safety warning about the scanner not being waterproof and avoiding moisture.
Advises on legal regulations regarding scanner use in vehicles.
