What to do if my Uniden DCT748-4 can't make or receive calls?
If your Uniden Telephone is unable to make or receive calls, verify that you are within the base's range and that the line isn't already in use. Check both ends of the base telephone line cord and ensure the AC adapter is correctly plugged into both the base and the wall outlet. Try disconnecting the AC adapter for a few minutes before reconnecting it.
What to do if the charge LED won't illuminate on my Uniden Telephone?
If the charge LED on your Uniden Telephone doesn't light up when the handset is in the cradle, ensure the AC adapter is properly connected to the base or charger and the wall outlet. Also, make sure the handset is correctly seated in the cradle and that the charging contacts on the handset are clean.
Why is my Uniden DCT748-4 Telephone answering system not working?
If the answering system on your Uniden Telephone isn't working, first check that the base unit is plugged in and the answering system is turned on. Also, ensure that the message record time is not set to Announce only.
What to do if my Uniden DCT748-4 Telephone handset doesn't communicate with other handsets?
If your Uniden Telephone handset isn't communicating with other handsets, make sure that you have registered all handsets.
How to fix weak audio on Uniden Telephone?
If the audio on your Uniden Telephone sounds weak, try moving the handset or base away from any metal objects or appliances. Also, ensure that you are not too far from the base.
Why is my Uniden DCT748-4 Caller ID not displaying?
If the Caller ID is not displaying on your Uniden Telephone, it might be because the call was placed through a switchboard. It may also indicate a problem with your Caller ID service, so you should call your local telephone company to verify that your Caller ID service is current.
What to do if my Uniden Telephone messages are incomplete?
If the messages on your Uniden Telephone are incomplete, the incoming messages may be too long, or the memory may be full. Delete some or all of the saved messages.
What to do if my Uniden Telephone extra handset can't join the conversation?
If an extra handset can't join the conversation on your Uniden Telephone, ensure that there are not already two handsets using the conference feature and that another handset is not in privacy mode.
Why Room Monitor feature does not work on my Uniden DCT748-4 Telephone?
If the Room Monitor feature does not work on your Uniden Telephone, make sure to place the handsets within the range of the base.
General| Handsets | 4 |
|---|---|
| Caller ID | Yes |
| Call Waiting | Yes |
| Intercom | Yes |
| Power | AC adapter |
| Speakerphone | Yes |
| Display | LCD |
Identifies and explains the various buttons and features on the phone handset.
Identifies and explains the various buttons and indicators on the phone base unit.
Guides through the essential steps for setting up the phone for first-time use.
Information on adding more handsets for expanded system capabilities.
Step-by-step instructions for registering additional handsets with the base unit.
Covers changing digital security codes and global system settings like time and dial mode.
Customizes handset features like ringers, display, answering modes, and language.
Explains the fundamental procedures for initiating and answering calls.
Details features like Call Waiting, placing calls on hold, and redialing.
Covers Clarity Booster, microphone muting, and volume adjustments.
Explains Privacy Mode, Tone Dialing Switch-over, and out-of-range behavior.
Guides on making conference calls, using intercom, and room monitoring.
Covers storing, editing, viewing, dialing, copying, and erasing phonebook entries.
Explains Caller ID and Call Waiting features, including Call Waiting Deluxe.
Details on viewing, deleting, and dialing from the Caller ID list.
Configures security, ring time, record time, alerts, language, call screen, and greetings.
Instructions for playing, repeating, skipping, and deleting messages, plus recording conversations.
Provides methods for accessing and controlling the answering system remotely.
Provides solutions for frequently encountered problems with the phone's operation.
Critical instructions for handling accidental exposure to moisture or liquid.
General warnings and safety guidelines for product usage.
Guidelines for selecting a location, connecting lines, and applying power.
Compliance information and technical specifications for Industry Canada.
To Next Page
