Uniden JACKSON - Specifications; General Specifications; Measurement Conditions

A. SPECIFICATIONS
1. GENERAL
Channel and Frequency Range
Crystals
Microphone
Speaker
Antenna Connecter
Jacks & Connectors
Controls
Meter
Illumination
Size
Weight
Accessories
2. MEASUREMENT CONDITIONS
a) Power Source
b ) Antenna Impédance
c) Test Température
d) AM Modulation Frequency
e) FM Modulation Frequency
f) SSB Modulation Frequency, Two
Tone
g) Mean Signal Input Level
h) Reference AM Modulation
Percentage
226 А
Band 26.065
- 26.505
MHz
В
Band
26.515
- 26.955
MHz
С
Band 26.965
- 27.405 MHz
D
Band
27.415
- 27.855
MHz
E
Band 27.865
- 28.315
MHz
3
600 ohms, Dynamic Type
8 ohms, 3 V
M Type
Mic 4P
EXT. SP -3.50
PA. SP -3.50
DC Power —3P
Channel Selector, Mode Selector
FM—AM-USB—LSB, Mic Gain, ON/OFF Power
Switch & Volume, ON/OFF PA Switch &
Squelch, RF Gain, Coarse, Fine,
Band Selector A—B—C—IMS, Noise Blanker/
ANL Switch, Roger Веер Switch, S/RF-Mod
Switch and +10 kHz — Normal Switch
RF Output Power, Signal Strength and
Modulation
Channel Number Indication (LED)
RX, TX Indication (LED), Meter Lamp
7.784"(W) X 2.36"(H) X 11.22"(D)
5 Pounds (2.2 kgs)
DC Power Cable with Built-in Fuse,
Microphone and Microphone Hanger
13.8 V (DC)
50 ohms
25
1 kHz
1 kHz
500 Hz $ 2.400 Hz
1.000 uV
1 kHz 30%
All manuals and user guides at all-guides.com