EasyManua.ls Logo

Uniden UH500SX User Manual

Uniden UH500SX
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Uniden UHF, Marin Radios & Scanners Resetting Procedure
Updated on 04/11/2016
UHF Radios:
Model No: UH011
Turn the unit off, Press and hold “TSQ” & “DUP” buttons together at the same time and turn the
power back on. After 15 seconds turn power back off then turn on
Model No: UH012SX
Turn the unit off, Press and hold “INST” & “DUP” buttons together at the same time and turn the
power back on. After 15 seconds turn power back off then turn on.
Model No: UH013SX
Turn the unit off, Press and hold “INST (SET/SKIP)” & “SQ” buttons together at the same time
and turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH015SX
Turn the unit off, Press and hold DCS/CTCSS” & “POL(MEM)” buttons together at the same
time and turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH035
Turn the unit off, Press and hold “DUP” & “MON” buttons together at the same time and turn
the power back on. After 15 seconds turn power back off, then turn on
Model No: UH036/UH035-2
Turn the unit off, Press and hold “[channel▲] and [vol▲]” buttons together at the same time and
turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH037
Turn the unit off, Press and hold “DUP” & “MON” buttons together at the same time and turn
the power back on. After 15 seconds turn power back off, then turn on
Model No: UH037SX-NB
Turn the unit off, Press and hold “[channel▲] and [ vol ▲]” buttons together at the same time
and turn the power back on. After 15 seconds turn power back off then on

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Uniden UH500SX and is the answer not in the manual?

Uniden UH500SX Specifications

General IconGeneral
BrandUniden
ModelUH500SX
CategoryMarine Radio
LanguageEnglish

Summary

UHF Radios Reset Procedures

UH011 Reset Procedure

Turn unit off, press & hold TSQ & DUP, power on, then off.

UH012SX Reset Procedure

Turn unit off, press & hold INST & DUP, power on, then off.

UH013SX Reset Procedure

Turn unit off, press & hold INST (SET/SKIP) & SQ, power on, then off.

UH015SX Reset Procedure

Turn unit off, press & hold DCS/CTCSS & POL(MEM), power on, then off.

UH035 Reset Procedure

Turn unit off, press & hold DUP & MON, power on, then off.

UH036/UH035-2 Reset Procedure

Turn unit off, press & hold [channel ▲] & [vol▲], power on, then off.

UH037 Reset Procedure

Turn unit off, press & hold DUP & MON, power on, then off.

UH037SX-NB Reset Procedure

Turn unit off, press & hold [channel ▲] & [vol ▲], power on, then off.

UH038SX/UH038SX-NB Reset Procedure

Turn unit off, press & hold SCAN & MON, power on, then off.

UH039 Reset Procedure

Turn unit off, press & hold [mon] & [vol▲], power on, then off.

UH040XR Reset Procedure

Turn unit off, press & hold SCAN & DUP, power on, then off.

UH041 Reset Procedure

Turn unit off, press & hold [mon] & [vol▲], power on, then off.

UH042XR Reset Procedure

Turn unit off, press & hold SCAN & DUP, power on, then off.

UH043SX/UH043SX-NB Reset Procedure

Turn unit off, press & hold SCAN & MON, power on, then off.

UH044XR Reset Procedure

Turn unit off, press & hold SCAN & DUP, power on, then off.

UH044SX Reset Procedure

Turn unit off, press & hold SCAN & CALL, power on, then off.

UH047 Reset Procedure

Turn unit off, press & hold SCAN & MON, power on, then off.

UH049SX Reset Procedure

Turn unit off, press & hold SCAN & MEM, power on, then off.

UH050XR Reset Procedure

Turn unit off, press & hold SCAN & DUP, power on, then off.

UH052 Reset Procedure

Turn unit off, press & hold SCAN & DUP, power on, then off.

UH054 Reset Procedure

Turn unit off, press & hold SCAN & DUP, power on, then off.

UH060 Reset Procedure

Turn unit off, press & hold SCAN & TXP/CTCSS, power on, then off.

UH064/UH064SX-NB Reset Procedure

Turn unit off, press & hold SCAN & MON, power on, then off.

UH065SX Reset Procedure

Turn unit off, press & hold SCAN & MEM, power on, then off.

Marine Radios Reset Procedures

Scanners Reset Procedures

Related product manuals