Uniden UH5050 - User Manual

Uniden UHF, Marin Radios & Scanners Resetting Procedure
Updated on 04/11/2016
UHF Radios:
Model No: UH011
Turn the unit off, Press and hold “TSQ” & “DUP” buttons together at the same time and turn the
power back on. After 15 seconds turn power back off then turn on
Model No: UH012SX
Turn the unit off, Press and hold “INST” & “DUP” buttons together at the same time and turn the
power back on. After 15 seconds turn power back off then turn on.
Model No: UH013SX
Turn the unit off, Press and hold “INST (SET/SKIP)” & “SQ” buttons together at the same time
and turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH015SX
Turn the unit off, Press and hold DCS/CTCSS” & “POL(MEM)” buttons together at the same
time and turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH035
Turn the unit off, Press and hold “DUP” & “MON” buttons together at the same time and turn
the power back on. After 15 seconds turn power back off, then turn on
Model No: UH036/UH035-2
Turn the unit off, Press and hold “[channel▲] and [vol▲]” buttons together at the same time and
turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH037
Turn the unit off, Press and hold “DUP” & “MON” buttons together at the same time and turn
the power back on. After 15 seconds turn power back off, then turn on
Model No: UH037SX-NB
Turn the unit off, Press and hold “[channel▲] and [ vol ▲]” buttons together at the same time
and turn the power back on. After 15 seconds turn power back off then on

Summary

UHF Radios Reset Procedures

Model No: UH011 Reset

Turn unit off, press and hold TSQ & DUP, then power on. After 15 sec, power off then on.

Model No: UH012 SX Reset

Turn unit off, press and hold INST & DUP, then power on. After 15 sec, power off then on.

Model No: UH013 SX Reset

Turn unit off, press and hold INST (SET/SKIP) & SQ, then power on. After 15 sec, power off then on.

Model No: UH015 SX Reset

Turn unit off, press and hold DCS/CTCSS & POL(MEM), then power on. After 15 sec, power off then on.

Marine Radios Reset Procedures

Model No: UM355 VHF Reset

Turn unit off, press and hold INST & SCAN, then power on. After 15 sec, power off then on.

Model No: UM425 VHF Reset

Turn unit off, press and hold MENU & SCAN, then power on. After 15 sec, power off then on.

Model No: UM455 VHF Reset (Without MMSI)

Press & Hold [CLR] & [CALL] Keys for Test Mode, then [16/9] to clear memory.

Scanners Reset Procedures

Scanner Model: EZ130 XLT Reset

Turn unit off, press and hold No 2 & Store, then power on. After 15 sec, power off then on.

Scanner Models: UBC126 AT et al. Reset

Turn unit off, press and hold No 2, No 9 & Hold, then power on. After 15 sec, power off then on.

Scanner Model: UBC355 XLT Reset

Turn unit off, press and hold L/O & Program, then power on. After 15 sec, power off then on.

Uniden UH5050 Specifications

General

Brand	Uniden
Model	UH5050
Category	Marine Radio
Language	English