Understanding Your Radio
11
Understanding Your Radio
About This Manual
The screen displays used in this manual are representations of what might appear
when you use your radio. Since what you see depends on the frequencies for your
area and the settings you select, you might notice some differences between what is
in this manual and what appears on your radio's display. Buttons you press appear
in bold type and text that appears on the display appears in italic type.
How The Radio’s Controls Appear in This Manual
To help navigate the radio's menus, the steps shown in this manual describe the
displays you see and the keys you press or control you operate to get a desired
result.
This example shows you how to use the radio's menu to program a user MMSI for
the first time. It shows you the control to use (PUSH/SELECT) to view a series of
choices and the correct option to select (USER MMSI) as you rotate PUSH/SELECT.
It also instructs you to press PUSH/SELECT to select the option.
Important: If you have already set the user MMSI, do not change it unless you
have received a new user MMSI. After you program a user MMSI for the first time,
you can only change it once more. If you try to change the user MMSI a third time,
the radio will not accept the change. To change the user MMSI again, you must
return the radio to Uniden for reprogramming.
1. Rotate PUSH/SELECT to select USER MMSI, then press
PUSH/SELECT to select it.
If a user MMSI has already n programmed, you see the
following screen. Stop here.
If a user MMSI has already been programmed twice, you
see the following screen. Stop here.
Otherwise, if a user MMSI has not been programmed, you
see the following screen.
AUTO CH SW
POS REPLY
WHAM
USER MMSI
16
USER MMSI
685749638
16
USER MMSI
685749638
16
CAN’T CHANGE
OVER 2 TIMES
USER MMSI
---------
16
Understanding Your Radio
UM525 Paper OM.fm Page 11 Tuesday, January 4, 2005 2:54 PM
To Next Page
Loading...
Need help?
General
