Why won't my Uniden USC230 Scanner start scanning?
Your Uniden Scanner might not start scanning for several reasons: * The channel might not be active, so wait for a transmission. * You may need to press the Scan button. * The squelch might need adjustment. * One or more channels might be locked out, so ensure the channels you want to scan are not locked out. * The antenna might need adjustment; check the antenna connection.
What to do if my Uniden Scanner has improper reception?
If you are experiencing improper reception with your Uniden Scanner, try the following: * The antenna might need to be adjusted. Check the antenna connection or move/reposition the antenna. * Move the scanner. * You might be in a remote area that could require an optional multi-band antenna. Check with your dealer or local electronics store.
Why won't my Uniden Scanner stop scanning?
If your Uniden Scanner won’t stop scanning, it could be due to several factors: * The squelch might need adjustment. Adjust the squelch threshold. * The antenna might need adjustment; check the antenna connection. * One or more channels might be locked out, so ensure the channels you want to scan are not locked out. * The channel’s frequency might not be stored in memory. Ensure the channel’s frequency is stored.
General| Modulation Types | AM, FM, WFM |
|---|---|
| Priority Scan | Yes |
| Weather Scan | Yes |
| Bands | VHF, UHF |
| Frequency Steps | 5, 6.25, 8.33, 10, 12.5 kHz |
| Display | LCD |
Important safety information regarding the use of headphones and earphones.
General safety warnings about keeping the unit away from rain or moisture.
Highlights Close Call technology, CTCSS/DCS squelch, and channel alerts.
Details Custom Search, CTCSS/DCS Search, Quick Search, Auto Store, Priority, and Scan/Search Delay.
Details Continuous Tone Coded Squelch System and Digital Coded Squelch.
Guidelines for using internal, rechargeable, and non-rechargeable batteries, and AC power.
Instructions for connecting antennas, earphones, extension speakers, and belt clips.
Overview of the keypad, display indicators, menu, and scroll control.
Steps for turning on the scanner, setting squelch, and starting system scanning.
Procedures for scanning races, selecting driver frequencies, and holding on cars.
Details on locking/unlocking systems and channels, and holding on systems.
Instructions for quick-storing and quickly recalling channels.
Steps for planning and programming new radio systems into the scanner.
Introduction to the Close Call feature for detecting nearby transmissions.
Customizing Close Call behavior, modes, alerts, and frequency bands.
Guidance on resolving issues like scanner not working or poor reception.
To Next Page