Shielded Category 5e (or above) cabling with drain wire should be used for all
outdoor wired Ethernet connections and should be grounded through the AC ground
of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the UVC-G3-
Flex and the other at the entry point to the building. The ETH-SP-G2 will absorb
power surges and safely discharge them into the ground.
To Next Page
Loading...
