Need help?Do you have a question about the UniFi UVC-G3-FLEX and is the answer not in the manual?
General| Video Compression | H.264 |
|---|---|
| Maximum Frame Rate | 30 FPS |
| Microphone | Yes |
| Max. Power Consumption | 4W |
| Ingress Protection | IP67 |
| Certifications | CE, FCC, IC |
| Enclosure materials | Plastic |
| Mounting | Wall, Ceiling, Pole |
| Resolution | 1920 x 1080 |
| Night Mode | Automatic |
| Night Vision | Yes |
| Image Settings | Brightness, Contrast, Sharpness, Saturation |
| Networking Interface | 10/100 Ethernet |
| Power Method | 802.3af PoE |
| Operating Temperature | -20 to 50 °C |
| Operating Humidity | 20 to 80% (non-condensing) |
| Software | UniFi Video |
Specific requirements for installing the camera in outdoor environments.
Details on LED indicators, microphone, lens, sensors, Ethernet port, and reset button.
Information on optional mounts and decorative camera skin covers.
Instructions for mounting the camera on a flat surface like a desk or table.
Steps for securely mounting the camera on walls or ceilings.
Guide for attaching the camera to a pole using zip ties and mounts.
Step-by-step guide for using the UniFi Protect app to set up the camera.
Important safety precautions, warnings, and electrical safety information.
Details on FCC, ISED Canada, and CE marking compliance.
To Next Page
