EC DECLARATION OF CONFORMITY
IN COMPLIANCE WITH:
DIRECTIVE 2006/42/ES AND THE MACHINERY SAFETY RULES
(OFFICIAL GAZETTE OF RS, NR. 75/08, 66/10 and 74/11)
MANUFACTURER:
UNIFOREST D.O.O.
Latkova vas 81d, 3312 PREBOLD, SLOVENIJA
PERSON RESPONSIBLE FOR TECHNICAL DOCUMENTATION:
MARKO POLAK, UNIV.DIPL.INŽ., UNIFOREST,
Latkova vas 81d, 3312 PREBOLD
DESCRIPTION OF DEVICE - MACHINE:
WINCH:
UNIFOREST 45H, 55H, 55Hpro, 65H, 65Hpro, 85H, 85Hpro
WE DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE ABOVE MENTIONED MACHINE
WINCH:
UNIFOREST 45H, 55H, 55Hpro, 65H, 65Hpro, 85H, 85Hpro
IS COMPLIANT WITH THE FOLLOWING REGULATIONS AND STANDARDS:
DIRECTIVE 2006/42/EC AND THE MACHINERY SAFETY RULES
(OFFICIAL GAZETTE OF RS, NR. 75/08, 66/10 and 74/11)
HARMONISED AND OTHER STANDARDS:
SIST EN ISO 12100:2011 SIST EN ISO 4254-1:2010/ AC:2011
SIST EN ISO13857:2008 SIST EN ISO 4413:2011 ÖNORM L5276:2008
DATE: SIGNATURE OF RESPONSIBLE PERSON:
PREBOLD, 12. 04. 2019 MARKO POLAK, UNIV.DIPL.INŽ.
To Next Page
Loading...
Need help?
General
