Unify OpenScape DECT Phone SL6 User Manual

Using call forwarding 57
Programming a forwarding destination
u Open the System Menu.
s t w Select and confirm the basic service.
s t w Select the menu item and confirm.
w Confirm the option shown. "Variable forwarding" is displayed.
w Confirm the option shown. "Fixed forwarding" is displayed.
w Confirm the option shown. The display shows "Forwarding for internal".
s t w Select and confirm the option shown.
o Enter the phone number for the forwarding destination. Any destination
previously programmed will be overwritten.
w Confirm when the complete number has been entered.
To select a different forwarding type, proceed as described on  page 56.
If variable forwarding was previously programmed and activated, it is deactivat-
ed and the forwarding destination is deleted (for exception, see  page 56).
Fixed forwarding is deactivated.
Deleting a forwarding destination
A variable forwarding destination is automatically deleted when the forwarding
type is deactivated.
Activating variable forwarding
Variable forwarding is automatically activated when the forwarding destination is
programmed.
Deactivating variable forwarding
You can deactivate all variable forwarding types in the Service menu (Basic Ser-
vice).
u Open the system menu.
s t w Select and confirm the basic service.
s t w Select the menu item and confirm.
w Confirm the option shown."Variable forwarding" is displayed.
w Confirm the option shown."Fixed forwarding" is displayed.
w Confirm the option shown.The display shows "Forwarding for internal".
s t w Select and confirm the option shown. Variable forwarding is deactivated and
the forwarding destination is deleted.
To select a different variable forwarding type, proceed as described on
 page 56.
BASIC SERVICE
DESTINATIONS
FORWARD
NEXT
NEXT
ENTER DESTIN.:
SAVE
BASIC SERVICE
DESTINATIONS
FORWARD
NEXT
NEXT
Deactivate

Unify OpenScape DECT Phone SL6 Specifications

General

Brand	Unify
Model	OpenScape DECT Phone SL6
Category	Cordless Telephone
Language	English