56 Using call forwarding
Variable forwarding
For variable forwarding you can choose between six different call forwarding
types:
• Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding on busy
• Call forwarding no reply
• Forwarding on busy/after timeout
Remark: The various forwarding types must be configured for the user.
The forwarding types are mutually exclusive except for "forwarding for internal"
and "forwarding for external". You can program a forwarding destination for each
of the two exceptions and activate them both.
Example:
You have activated variable forwarding. If you now program and thus activate
forwarding after timeout, variable forwarding will be automatically deactivated
and its forwarding destination will be deleted.
Selecting a variable forwarding type
Select Destinations and Forwarding in the Service menu.
u Open the system menu.
s t w Select and confirm the basic service.
s t w Select the menu item and confirm.
w Confirm the option shown.
Variable forwarding is offered first.
Output on first line.
s t w Confirm to select the next forwarding type.
Output on first line.
s t w Confirm to select the next forwarding type.
Output on first line.
s t w Confirm to select the next variable forwarding type.
Output on first line.
s t w Confirm to select the next variable forwarding type.
or
s t To edit the current variable forwarding type, select the required command.
BASIC SERVICE
DESTINATIONS
FORWARD
FWD-VAR-ALL
NEXT
FWD-FIXED off
NEXT
FWD-VAR-ALL-INT
NEXT
FWD-VAR-ALL
NEXT
To Next Page
Loading...
Need help?
General
