38
12 BURNER MANUAL OPERATION
The operator can decide if choosing burner manual operation at a settable fixed load or modulating operation through the automatic load controller, then
can also set the burner shutdown by means of the “burner off” function.
Choose the type of operation (Au-tom / Manual / Off).
1st level 2nd level 3rd level Password Description
ManualOpe- ration Menu level for activating manual operation with the preselected load
u-tom/
Manual/Off
Selection of manual or automatic operation
utomatic/ Burner
on / Burner off
User
Setting the load percentage for the manual operation
To set the load percentage at which the burner must operate in manual mode, proceed as described below.
1st level 2nd level 3rd level Password Description
ManualOpe- ration Menu level for activating manual operation with the preselected load
SetLoad
Set target load
0..100%
User
To Next Page
Loading...
