Need help?Do you have a question about the Unigas LAMTEC BT3 Series and is the answer not in the manual?
Outlines general installation, usage, and responsibility requirements.
Specific guidelines and warnings for burner installation, operation, and maintenance.
General guidelines for fuel usage, covering electrical and gas connections.
Detailed instructions and safety precautions for electrical connections.
Instructions and precautions for operating the burner with different fuel types.
Overview of the burner's main components, features, and operation.
Details on identifying different burner models and their configurations.
Detailed technical data: output, gas rate, power supply, operating conditions.
Graphical representation of burner performance under various conditions.
Instructions for burner transport, storage, handling, and connection.
Step-by-step instructions for physically attaching the burner to the boiler.
Procedures and diagrams for connecting gas train components.
Step-by-step instructions for making electrical connections to the burner.
Defines the burner's intended use and prohibits any other application.
Procedures for adjusting air flow and fuel rates for optimal combustion.
Instructions for setting and adjusting burner performance curves via the controller.
Regular maintenance tasks for proper burner operation and longevity.
Procedures for checking and adjusting ignition and detection electrodes.
Guide to diagnosing and resolving common issues during gas operation.
General| Control | Electronic |
|---|---|
| Control Type | Microprocessor-based |
| Operating Temperature Range | -20°C to +60°C |
| Protection Class | IP40 |
| Fuel | Natural gas |
| Power Supply | 230V, 50/60Hz |
| Flame Detection | UV sensor |
To Next Page
