Unison Research
Unico CD
17
PREVIOUS TRACK Correspondingly, when pushing the PREVIOUS button
on the front panel, the message PREV is
displayed and the reproduction starts from the
beginning of the current track. Pushing the PREVIOUS
button again makes the player jump to the beginning
of the previous track.
SCAN REV If you keep the same button pushed for one second,
the player scans the disc reverse starting from the
current position while providing an audible signal to
make it easier to identify the position within the
track. The message RW is displayed. When the
button is released, the music starts playing from the
reached position.
The same functions are accessible from the remote handset: in this case to
select a track use the buttons identified by the symbols and , while to
scan the disc use the buttons and , keeping them pressed until the
desired position has been found.
PAUSE To pause the reproduction, press rapidly the /
PLAY/STOP button on the front panel or the /
PLAY/PAUSE button on the remote handset: the message
PAUSE is displayed and the player stands by in
the current position. To resume disc play, push again
the buttons / PLAY/STOP or / PLAY/PAUSE.
STOP To stop the reproduction, hold the / PLAY/STOP
button for one second, or use the STOP button on
the remote handset: the message STOP is
displayed and the player jumps back to the initial
position of the current track.
Pushing again the / PLAY/STOP button for one
second, or the STOP button on the remote handset,
causes the Unico CD to reset to the initial condition,
in which the message STOP , the total number of
the tracks and the total time are displayed.
To Next Page
Loading...
Need help?
General
