Unitech EA500 User Manual

EA500 User’s Manual
1.4 Getting Started
1.4.1 Charging EA500
Before using the terminal for the first time, you need to charge it for about 24
hours. After that, you can charge the terminal for 4 hours to recharge the
battery to full capacity. Charge the terminal using the USB charging cable or
the cradle.
Connect the type C USB cable to the USB port on EA500 and the other end of
the USB cable please connect to AC power adapter into the electrical outlet on
the USB plug.
The charging LED indicator on EA500 is turning red when it is in charging state.
The red light is off after the charger is fully charged.
9
© 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.

Unitech EA500 Specifications

General

Brand	Unitech
Model	EA500
Category	Touch terminals
Language	English