Unitech PA600 Programming Manual

- 5
7. BlueTooth relative API - BTAPI.DLL .............................................................................. 39
7.1. Enable/Disable Bluetooth Power status...................................................................................................39
7.2. Get BT Power Status..................................................................................................................................39
8. DYNAMIC LOAD DLL.......................................................................................................40
9. USEFUL FUNCTION CALL - WITHOUT INCLUDE SYSIOAPI.DLL................................41
9.1. Warm-boot, Cold-boot and power off..................................................................................................................... 41
9.2. GET DEVICE ID............................................................................................................. 41
10. UPDATE NOTES .................................................... ERROR! BOOKMARK NOT DEFINED.

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm