Unitech PS8000 - Decode Illumination and Decode Aiming Pattern

27
3-9 Decode
illumination
and decode aiming pattern
Decode illumination mode: Enable illumination causes the imager to turn on the illumination to
aid decoding. Disable illumination to turn off illumination for the imager during decoding. Better
quality images could be obtained with illumination support. The effectiveness of the illumination
decreases as the distance to the target increases.
Decode aiming pattern: When this option is enabled, the imager will project the aiming pattern
during the code capture.
Multiple-scan setting
Single-scan setting
Option barcode
Option
Alpha. Entry
Decode illumination
Always Off
00
Always On
01
Flashing
02
Always-On when
reading
03*
*
Decode aiming pattern
Always Off
00
Always On
01
On before reading
02
On when reading
03*
*