United States Stove Company GW1949 User Manual

Please read this entire manual before installation
and use of this pellet fuel-burning room heater.
Failure to follow these instructions could result in
property damage, bodily injury, or even death.
Contact your local building or re ofcials
about restrictions and installation inspection
requirements in your area.
Save these instructions.
This manual will help you to obtain efcient,
dependable service from the heater, and enable
you to order repair parts correctly. Keep in a safe
place for future reference.
French version is available for download from the U.S. Stove website: http://www.usstove.com
La version française est disponible pour téléchargement à partir du site
U.S. Stove website: http://www.usstove.com
This unit is not intended to be used as a primary source of heat.
MODEL: GW1949
Owner’s Operation And Installation Manual
852489C-3401G
United States Stove Company
227 Industrial Park Rd. P.O. Box 151
South Pittsburg, TN 37380
Phone (800) 750-2723 www.usstove.com
SAFETY AND EPA COMPLIANCE
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a
manufactured or mobile home (for USA only) . Your stove conforms to UL 1482-11 (R2015), 2010, and Certied to
ULC S627-00, and(UM) 84-HUD
U.S. Environmental Protection Agency
Certied to comply with 2015 particulate emissions
standards.
DO NOT INSTALL IN A SLEEPING ROOM
Tested &
Listed By
Portland
Oregon USA
Report #: 0215PS047S

United States Stove Company GW1949 Specifications

General

Type	Wood Stove
Heating Capacity	1, 800 sq ft
Fuel Type	Wood
Material	Steel
EPA Certified	Yes
Blower Included	No
Heating Area	1, 800 sq ft

Summary

SAFETY AND EPA COMPLIANCE

U.S. Environmental Protection Agency

EPA compliance certification for emissions standards.

Specifications

HEATING SPECIFICATIONS

Details on fuel burn rate, burn time, and hopper capacity.

DIMENSIONS

Physical measurements of the stove unit.

OUR COMMITMENT TO SAFETY

Floor Protection Requirements

Stove Pipe Install/ Helpful Hints

COMBUSTIBLE WALL CHIMNEY CONNECTOR PASS-THROUGHS

Method A: Clearance to Combustible Wall Member

Clearance requirements for wall pass-through using brick and clay liner.

Method B: Clearance to Combustible Wall Member

Clearance requirements for wall pass-through using factory-built chimney section.

Method C: Clearance to Combustible Wall Member

Clearance requirements for wall pass-through using ventilated wall thimble.

Method D: Clearance to Combustible Wall Member

Clearance requirements for wall pass-through using solid-pak chimney section.

Main Body Assembly

Assembly

Using The Correct Fuel

Helpful Hints

VENTILATION

Guidance on ensuring adequate air supply for stove operation.

INSTALLATION

Advice on proper stove and chimney installation procedures.

PERFORMANCE

Tips for optimizing stove efficiency and operation.

QUESTIONS

Contact information for support and inquiries.

Lighting With A Handheld Propane Torch

Lighting With A Heat Gun

Controlling The Temperature

SHUTTING DOWN THE STOVE

Procedure for safely turning off the stove.

Tuning Your Stove

Mobile Home Installation (US ONLY)

Cleaning And Maintenance

CLEANING

Instructions for weekly cleaning of the stove unit.

CREOSOTE-FORMATION AND NEED FOR REMOVAL

Information on creosote formation and its removal.

DISPOSAL OF ASHES

Proper procedures for ash disposal.

SOOT AND FLY ASH: FORMATION AND NEED FOR REMOVAL

Guidance on soot and fly ash management.

Helpful Hints For Running Your Stove

Repair Parts

Service Record

Limited Warranty

CLAIM PROCEDURE

Steps for reporting and processing warranty claims.

NOT COVERED

Exclusions from the limited warranty coverage.

LIMITATIONS AND EXCLUSIONS

Conditions and restrictions of the warranty.

YOUR DUTIES

Purchaser's responsibilities for installation and operation.

PROBLEM/RESOLUTION

Procedure for addressing issues and obtaining service.

WARRANTER

Contact information for the warranty provider.

How to Order Repair Parts