H
hilljadeAug 11, 2025
What to do if my United States Stove KP60-XH does not start a fire?
- EEdwin LangAug 12, 2025
If your United States Stove Stove fails to ignite when you press the 'ON' button, first turn the stove off and clear any unburned fuel from the burnpot, then try again. Check the pellet quality, and replace them if they are moist, wet, or dirty. Ensure proper draft pressure by checking that the viewing door is sealed correctly; adjust the door catch or replace the door gaskets if needed. Clear any obstructions from outside connections and clean the exhaust system. Also, check the auto-start igniter for blockages of ash or soot. If the igniter isn't glowing red hot during start-up, it may need replacement, or there could be an electrical control system issue.