United States Stove King User Manual (English)

Questions and Answers:

B
brianwatsonJul 29, 2025
What to do if my United States Stove keeps shutting down?
- D
  dominique64Jul 30, 2025
  If your United States Stove shuts down or the fire goes out, it could be due to several reasons. The burnpot might be running out of fuel, so start by refilling the hopper. Another cause is a loss of draft pressure. Ensure the viewing door is properly closed and sealed; adjust the door catch or replace the door gaskets if needed. Also, check for obstructions in outside connections and clean the exhaust system. Finally, verify that the pressure switch connection to the firebox is clear of ash or obstructions. The auger system may also be jammed, or fuel may be 'bridging' in the hopper, which prevents fuel from flowing into the auger feed system.
S
sarahrobertsAug 7, 2025
Why United States Stove won't start?
- A
  Andre SanchezAug 8, 2025
  If your United States Stove isn't starting when you press the 'ON' button, the auto-start igniter may be failing to ignite the fuel. First, turn the stove off, clear any unburnt fuel from the burnpot, and try again. Check the pellet quality; replace them if they are moist, wet, or dirty. A loss of draft pressure could also be the cause, so ensure the viewing door is properly sealed (adjust the door catch or replace gaskets if necessary), check for any obstructions in the outside connections, and clean the exhaust system. Make sure the auto-start igniter isn't blocked by ash or soot. If you cannot visibly see the igniter glowing red during start-up, it might need replacement, or there could be an electrical control system problem.
B
Brittany WilsonAug 18, 2025
How to fix orange flame in United States Stove?
- D
  Diana RodriguezAug 18, 2025
  An orange, lazy flame in your United States Stove indicates an air/fuel mixture that's too rich. Begin by cleaning out the burnpot and burnpot housing. Ensure the viewing door is closed and sealed correctly; adjust the door catch or replace door gaskets if necessary. Check that all outside connections are free from obstructions and clean the exhaust system.