GO-M8010-6 Motor User Manual
© 2022 Unitree All Rights Reserved 5
120Ω
120Ω
Motor0
XT30
2+2
XT30
2+2
Motor1
XT30
2+2
XT30
2+2
Motor2
XT30
2+2
XT30
2+2
485+
485-
(b)
In the case of using multiple motors, the 120Ω matching resistor must be added to the motor head
and motor end to ensure electrical integrity. When facing serious communication packet loss, please
check if the matching resistor on the line is used correctly.
Note that when using the motor, the size of the power wire should be at least above 16AWG,
otherwise the motor will work because of the high voltage drop of the line.
4. Specifications of Connectors
Model: XT30(2+2)-F
Brand: AMASS
Rated Current 20A MAX(16AWG) signal pin: 1A
Contact Resistance
≤1.2mΩ
Service Life 100 times
Connector Dimensional Drawing:
To Next Page
Loading...