Unitrol SOLUTIONi - SETTING SECURITY LEVEL

SECTION C, PAGE 4
SOLUTION PERSONALIZATION
C2.2 SETTING SECURITY LEVEL: Turn the key to OPEN and press:
The display will show:
If you want to change the mode from that displayed, press .
The display will show:
C2.3 BYPASS KEYLOCK SECURITY CODE: You can enter a
three-digit number that can be used in place of opening the keylock. To select a
security code, press:
The display will show:
Press and the display will show:
Enter a 3-digit number and then press
PROGRAM
9
9
7
9
9
Bypass keylock
Security code = 000
Want to change? Push
the YES or NO button
YES
Bypass Keylock
Security code = 000
After entering data
Press YES
YES
PROGRAM
9
8
9
6
7
KEYBOARD LOCK IS:
STANDARD =1
Want to change? Push
the YES or NO button
YES
KEYBOARD LOCK IS:
STANDARD =1
FULL MANUAL =2
FULL AUTO =3
STEP
ENTER
STEP
ENTER