Unitrol SOLUTIONi - Page 79

SECTION D, PAGE 11
SOLUTION IN PRODUCTION
D5.3 CHECKING TIP FORCE: The display will show:
Press and the display will show:
Close the foot switch or hand buttons and the electrodes will close. They will stay
closed but will not pass any current.
The display will show:
The number displayed represents the calculated TIP FORCE.
D5.4 CHECKING AIR PRESSURE: Press and the display
will show:
Check TIP FORCE?
PRESS
the YES or NO button
YES
Check TIP FORCE?
Push foot switch or
Hand buttons
TIP FORCE = ###LB
When finished
press STEP
Remember, this TIP FORCE number is only accurate if you entered the
correct information in section B2 through B9.
Check AIR PRESSURE?
PRESS
the YES or NO button
STEP
ENTER