Unitron Moxi 2 - Connecting xReceiver Units to Moxi² Models

11
Attaching the standard, power
or super power xReceiver unit to
Moxi
2
Kiss
Attaching the xReceiver unit to Moxi
2
Kiss
1. Use the small silver tool to push the slider pin
slightly sideways.
2. Place the xReceiver unit on Moxi
2
Kiss.
3. Use the back of the small silver tool to push in the
slider pin.
Removing the xReceiver unit from Moxi
2
Kiss
1. Use the small silver tool to push the slider pin
slightly sideways.
2. Remove the xReceiver unit.