Unitron Moxi 2 User Manual

14
Feedback optimization
Run Feedback Optimization.
Appendix
Using the Moxi
2
shell removal tool
The shell removal tool is used to remove the top shell
from Moxi
2
to access the microphone protector.
Note: Moxi
2
Kiss and Moxi

Dura models do not have a
replaceable microphone protector. It is not necessary to
remove the shell.
Removing the top shell of Moxi
2
1. Open the battery door and insert the tool on a slight
angle, inserting one pin on the side of the tool with
the notch inside the battery compartment.
2. Twist the tool down in the opposite direction to
snap the tool into place.
3. Squeeze the tool in the center to push the shell out
of the notches.
4. Li the shell up and forward o the hearing
instrument and over the push button. This allows
access to the microphone protector.

Unitron Moxi 2 Specifications

General

Brand	Unitron
Model	Moxi 2
Category	Hearing Aid
Language	English