Unitron Moxi V-R User Manual

1. Quick guide
 beeps every
 minutes
Low battery warning
Multi-function button with indicator light
Charging your hearing aids
Before using your hearing aids for the rst time,
it is recommended to charge them for 3 hours.
Aer placing your hearing aid in the charger, the indicator
light on the hearing aid will show the charging state of the
battery until it is fully charged.
Charging: Slow blinking
indicator light
Fully
charged: Solid green indicator light
The button has several functions, the
primary function is as an on/o switch.
Together with your hearing care profes-
sional, you can decide if it also allows for
volume control and/or program change.
This is indicated in your individual instructions.
Phone calls: If paired with a Bluetooth® enabled
phone, a short press will accept
and a long press will reject an incoming call.
On/O: Firmly press the lower part of the button for
3 seconds until the indicator light blinks.
On: indicator light is solid green
O: indicator light is solid red
Enter flight mode: When device is o, press the lower
part of the button for 7 seconds until the solid orange
light appears. Then release the button.
Le & right hearing aid markings
Red marking for
right hearing aid.
Blue marking for
le hearing aid.
Tap control
(only available for models V9, V7, V5 and V3)
If paired with a Bluetooth® enabled device, multiple
functions can be accessed using tap control, please
refer to chapter 10. This is also indicated in your
individual instructions.
To use tap control tap the top of your ear twice.

Unitron Moxi V-R Specifications

General

Brand	Unitron
Model	Moxi V-R
Category	Hearing Aid
Language	English