Unitron Moxi - Specific Troubleshooting Scenarios; Telephone Reception Issues; Warnings and Precautions; General Safety Guidelines

Operating instructions
Push button
Your hearing aids are equipped
with a push button which can be
set for switching between
programs, adjusting your volume, or
adjusting comfort-clarity control (available
on Moxi 20 and 12 only).
Program control
If you have an active push button program
control, each time you push the button, you
will move to a new program.
13
Program 1
(e.g. automatic program) 1 beep
Program 2
(e.g. speech in noise) 2 beeps
Program 3
(e.g. easy-t/telephone) 3 beeps
Program 4 (e.g. music) 4 beeps
Easy-t/telephone (see pg 18) short melody
DuoLink (if enabled) Opposite ear beeps the
(see pg 16) same as side being adjusted